双网卡绑定自动化脚本

#!/bin/bash
if [ $# -lt 6 ];then
echo “Usage: $0  ”
echo “eg: $0 bond0 eth0 eth1 192.168.0.1 255.255.255.0 192.168.0.254″
exit 1
fi

#修改 ifcfg-bond* 文件
echo “DEVICE=$1
IPADDR=$4
NETMASK=$5
GATEWAY=$6
ONBOOT=yes
BOOTPROTO=none
USERCTL=no” >/tmp/ifcfg-$1
mv -f /tmp/ifcfg-$1 /etc/sysconfig/network-scripts/

#修改 ifcfg-eth0 文件
echo “DEVICE=$2
USERCTL=no
ONBOOT=yes
MASTER=$1
SLAVE=yes
BOOTPROTO=none” >/tmp/ifcfg-$2
mv -f /tmp/ifcfg-$2 /etc/sysconfig/network-scripts/

#修改 ifcfg-eth1 文件
echo “DEVICE=$3
USERCTL=no
ONBOOT=yes
MASTER=$1
SLAVE=yes
BOOTPROTO=none” >/tmp/ifcfg-$3
mv -f /tmp/ifcfg-$3 /etc/sysconfig/network-scripts/

##修改 network 文件
#sed /GATEWAY/d /etc/sysconfig/network >/tmp/network
#echo “GATEWAY=\”$6\”">>/tmp/network
#mv -f /tmp/network /etc/sysconfig/

#修改 modules.cof/modprobe.cof
MODCONF=/NULL
TEMPFILE1=/tmp/mod1.$$
TEMPFILE2=/tmp/mod2.$$
BAKFILE=/etc/.modconf

#选择绑定的模式是轮询还是冗余，一般建议选择1
echo “Please Select Your Bond Mode:(balance-rr/active-backup)or(0/1)?”
read MODE

if [ -f /etc/modprobe.conf ]; then
MODCONF=/etc/modprobe.conf
else
MODCONF=/etc/modules.conf
fi

cp $MODCONF $BAKFILE

sed ‘/alias[ \t]’$1′[ \t]bonding/d;/options[ \t]’$1′[ \t]/d;/install.*’$1′/d’ $MODCONF > $TEMPFILE1
cp $TEMPFILE1 $TEMPFILE2

if [ "$(grep "alias.bonding" $TEMPFILE1)" != "" ]; then
bondcount=$(grep “alias.bonding” $TEMPFILE1 | wc -l)
elif [ "$(grep "install.bond." $TEMPFILE1)" != "" ]; then
bondcount=$(grep “install.bond.” $TEMPFILE1 | wc -l)
else
bondcount=0
fi

if [ "$bondcount" -ge 1 ]; then
sed ‘/alias.bonding/d;s/(options[ \t])(bond[0-9]*)/install\ \2\ /sbin/modprobe\ –ignore-install\ bonding\ -o\ \2/’ $TEMPFILE1 > $TEMPFILE2

echo “install $1 /sbin/modprobe –ignore-install bonding -o $1 miimon=100 mode=$MODE” >> $TEMPFILE2
else

echo “alias $1 bonding” >> $TEMPFILE2
echo “options $1 miimon=100 mode=$MODE” >> $TEMPFILE2
fi
mv -f $TEMPFILE2 $MODCONF

#重启网络
echo “System will restart network continue(y/n)?”
read bb
if [ "$bb" = "y" ] || [ "$bb" = "yes" ] || [ "$bb" = "Y" ];then
for tempmod in $(lsmod | grep -i bond | awk ‘{print $1}’)
do
modprobe -r bonding -o “$tempmod”
done

/etc/init.d/network restart
fi
echo “OK!”
exit 0